Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp
glass cover and the cavity.
Replacing the oven lamp:
1.
You can find the lamp glass cover at the cavity ceiling.
Turn the lamp glass cover counterclockwise to remove it.
2.
Clean the glass cover.
3.
If necessary, replace the oven lamp with applicable 300°C heat
-
resistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
Ceiling
You can fold down the heating element on the ceiling to clean the ceiling easily.
WARNING!
Before you fold down the heating element deactivate the appliance. Make sure that the
appliance is cold. There is a risk of burns!
Folding down the heating element
1.
Remove the shelf supports.
2.
Hold the heating element with the two
hands at the front
3.
Pull it forwards against the spring pres-
sure and out along the support on both
sides.
4.
The heating element folds down.
The ceiling is ready to clean.
Installing the heating element
1.
Install the heating element in opposite
sequence.
Install the heating element correctly on the two sides above the support on the inner wall
of the appliance.
2.
Install the shelf supports.
Door and glass panels
To clean the door, remove it.
CAUTION!
Be careful when you remove the door from the appliance. The door is heavy!
24
Care and cleaning
Содержание EE3003011
Страница 1: ...EE3003011 EN OVEN USER MANUAL ...
Страница 27: ...27 ...
Страница 28: ...www aeg com shop 892945929 A 282011 ...