AEG EBA6310X, Руководство по обслуживанию

Страница: 10 / 10

SOI 06.09 FV 10/10 599 72 00-47
5
- GRINDER SET-UP
Remove the coffee beams
container, the back finger saver
and the knob. Turn the white shaft clockwise
till it stops. Remove the upper
part of the grinder by pulling it
upwards.
Verify the position of the white
basket (has to be as on the
picture).
Remove the white plastic ring by
pulling it. Turn the white shaft counter-
clockwise till it stops. Pull to
remove it.
Now you can change the setting:
Turn the gear
clockwise*
to
reduce the coarseness (fine
coffee).
Turnr the gear
counterclockwise*
to
increase the coarseness
(thicker).
Insert the white shaft, making
sure its longer notch is aligned
with the one on the grinder. Insert the white ring making sure
its notch as well is inserted on
the correct position.
Turn the shaft CLOCKWISE till it
stops to insert the upper gear.
Then turn the shaft all the way
COUNTERCLOCKWISE.
(*) before changing the setting, check and mark the initial position taking as reference the position of the
metal ball you see through the holes on the white ring.
Change the setting carefully by turning the white ring one or max two steps (one or two holes) either way as
required.