Downloaded from www.vandenborre.be
EN
1
2
12
Metal grease filters
CLEANING THE SELF-BEARING METAL GREASE FIL-
TERS
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press button H.
Cleaning the Filters
• These can be washed in the dishwasher, and need to
be cleaned whenever the H Led comes on or at least
once every 2 months use, or more frequently if use is
particularly intensive.
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards
the back side of the hood unit and simultaneously
pulling downwards.
• Any kind of bending of the filters has to be avoided
when washing them. Before fitting them again into
the hood make sure that they are completely dry.
(The colour of the filter surface may change through-
out the time but this has no influence to the filter ef-
ficiency).
• When fitting the filters into the hood pay attention
that they are mounted in correct position the handle
facing outwards.
• Close the comfort panel.
