English
39
NOTE:
Press
REC/REP
again to hide the info bar. The REC button remains top left on screen.
3. Press the button to finish recording.
NOTE:
• Press the
II
button to pause the current recording.
( see “9.5 Time Shift Function” on page 39)
Record a programme and watch another at the same time
During PVR recording you can switch to another programme of the same channel. In doing so, you will not interrupt the
recording.
If the programme is broadcast on a different channel, a warning message appears on the screen.
The programmes which are broadcast on a channel depend on the coverage area. Information on channels that are
broadcast in your coverage area can be found at www.überallfernsehen.de or at your specialist dealer.
9.3 Programmed Recording with EPG (Electronic Programme Guide)
1. Press the
EPG
button to access the electronic programme guide.
2. Press
INDEX
and press /
to select CHANNEL (1).
3. In CHANNEL (2) press
/ to select the channel.
4. Press
/ to select the desired programme.
5. Press the
red
button. The recorder window is displayed.
6. Press
OK
to confirm the entered times.
7. Programming is finished and the dates are shown in the
Overview
.
8. Press
EXIT
to close the window.
NOTE:
• During recording the info bar is displayed. Press
REC/REP
to hide the info bar. The REC button top left on screen
remains.
•
Important:
The device does not automatically turn off after the recording is finished.
Different Programme Modes
To change the recording mode of the programming via EPG, select the bottom line in the Timer window. Here, select
between the following modes:
Auto:
The preset times of the station are saved.
Once:
If necessary, you can change the preset start and end times.
Daily:
The programme is recorded daily.
Weekly:
The programme is recorded again on the same day of the week.
9.4 PVR Playback
1. Press the
INDEX
button to display your recordings.
2. Repeatedly press the
INDEX
button to sort the recordings by
Programme, Channel, Time
.
3. Press
/ to select the desired recording.
4. Press (19) to start playback.
5. Press to end playback.
NOTE:
• During playback the info bar is displayed. Press to hide the info bar. The PLAY button top left on screen remains.
• Press the
II
button to pause playback
( see “9.5 Time Shift Function” on page 39)
9.5 Time Shift Function
The time shift function allows you to interrupt a programme and to continue viewing it later. A USB device with sufficient
capacity must be connected. Time shift size list set after formatting
( see “9.1 PVR Settings” on page 38).
Содержание CTV 3204 LED
Страница 71: ......
