English
37
Delete Channel
Use the delete function after compiling your channel list by moving/swap the channels. Delete unwanted channels at the
end of the list (with channel number).
1. Press the
TV MENU
button to display the OSD main menu.
2. Press
in
CHANNEL
menu to select
Programme Edit
and press
OK
.
3. Press
/ to highlight the channel to be deleted.
4. Press the
red
button to delete the channel.
5. Press
EXIT
to exit the menu.
7.5 Display Information (only in DTV mode)
You can display additional information for the current channel.
1. Press
TV MENU
to enter the OSD main menu.
2. In the CHANNEL menu press
t
o select
Signal Information
and press
OK
.
8. Programme Info (EPG – only for DVB-T)
The Electronic Program Guide (EPG) is broadcast by many, but not all, programme providers. The contents can also
greatly vary.
The EPG shows a daily overview of current or upcoming programmes with their respective broadcasting times.
1. Press the
EPG
button to open the programme info.
2. Use the following buttons for changes:
/ :
Toggle between channel/time overview (1) and change the
date (2) or channel.
/ :
Select channel.
OK:
Access selected channel.
INDEX:
Go to channel/time overview (1). Press
/ to toggle be-
tween channel and time overviews.
CHANNEL:
The date (2) changes to CHANNEL. Press
/ to
select the channel with the programmes to be viewed.
Time:
CHANNEL changes to date (2). The window again
displays the individual channels (3) and their current pro
-
grammes (4).
INFO:
Display detail information about selected programmes.
yellow but-
ton:
Display schedule.
red button:
Open recording window
( see “9.3 Programmed Recording
with EPG” on page 39).
blue button:
Open remind window ( see “Save Programmes”).
EXIT:
Exit EPG.
Save Programmes
EPG allows you to save the programme start. The programmes are displayed in the schedule list. In on mode 10 sec-
onds before programme start a promt is shown asking you to switch channels. If no button is pressed or if you press
to
confirm the channel is switched. Press to stay with the current channel.
1. Press the EPG button to open the
EPG
window.
2. Press
INDEX
and then press /
to select CHANNEL (1).
3. In CHANNEL (2) press
/ to select the channel.
4. Press
/ to select the desired programme.
5. Press the
blue
button.
Overview
Содержание CTV 3204 LED
Страница 71: ......
