AEG CKB6540ACM, Руководство пользователя

Страница: 15 / 36

6.2 Burner overview
$
%
D
C
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
6.3 Replacing burner parts
1. Put carefully the burner crown on the
burner body. Let the crown fall freely
onto the body. Do not use force.
Make sure that the hole in the crown
is above the ignition candle.
Make sure that the location pegs are
in the slots in the burner body.
Make sure that you can move the
crown a small distance from side to
side.
2. Put the burner cap centrally on top of
the crown.
Make sure that the cap is correctly
installed, with the enamel side up
and you can move the cap from side
to side and front to back.
3. Light the burner.
If the burner does not ignite, adjust the
crown and cap again.
6.4 Turning the burner off
To put the flame out, turn the knob to the
off position .
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
6.5 Lid Safety Device
Lid has safety device, which cuts off the
gas supply for the hob. Closing the lid
activates the safety device.
WARNING!
Always use the knob for the
hob to switch off a burner.
Do not use the lid as a cut-
off device.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
WARNING!
Do not put the same pan on
two burners.
ENGLISH 15