AEG CG 6200, Руководство по эксплуатации, Страница: 47 / 324

g
47
• The coffee runs off too slowly.
0
Turn the knob for setting grinding tex-
ture (Fig. 12) one click clockwise whilst
the grinder is grinding beans for the
preparation of next coffee (see „Set-
ting the grinding texture“, page 42).
The symbol is on steady
• The waste coffee container is full.
0
Empty the waste coffee container and
clean it as described in the section
„Emptying the waste coffee container“,
page 44, then replace it.
The symbol is flashing
• The waste coffee container has proba-
bly not been replaced after cleaning.
0
Open the service door and insert the
waste coffee container.
The symbols or and are
flashing
• With the ground coffee function
selected, ground coffee has not been
poured into the ground coffee filler.
0
Add the ground coffee as described in
chapter „Using pre-ground coffee“,
page 40.
All coffee strength symbols
and are flashing
• The coffee beans have run out.
0
Fill the coffee bean container, see „Fill-
ing the coffee bean container“,
page 35
• If the coffee grinder is very noisy, this
could mean a small stone in the coffee
beans has blocked the grinder.
0
Contact the Customer Service Centre.
Blocking or damage caused by for-
eign objects in the grinder might be
excluded from the guarantee.
The symbol is on steady
• This indicates the presence of limescale
in the appliance.
0
The descaling procedure, described in
the section „Running the descaling
program“, page 45, needs to be per-
formed as soon as possible.
The symbol is on steady
• The service door is open.
0
Close the service door. If the service
door cannot be closed, check that the
brewing unit is inserted correctly (see
„Cleaning the brewing unit“, page 44).
The symbol is flashing
• The brewing unit has probably not
been replaced after cleaning.
0
Insert the brewing unit; see „Cleaning
the brewing unit“, page 44
• The inside of the appliance is very dirty.
0
Thoroughly clean the inside of the
appliance; see „Cleaning the brewing
unit“, page 44. If the message is still
displayed after cleaning, contact the
Customer Service Centre.
The symbol is on steady
• This indicates a general alarm.
0
Contact the Customer Service Centre.
The symbols and are flashing
• The machine has been switched on
with the steam knob in open position
.
0
Turn the steam knob clockwise (Fig. 10)
as far as it will go, to the position .
The symbols and are flashing
• The ambient temperature is too low to
operate the applience.
0
Use the appliance in a warmer room.
16 Problems that can be
resolved before calling the
Customer Service Centre
If the appliance is not working, the
causes of the malfunction can be iden-
tified and resolved by referring to
chapter „What to do if you see the fol-
lowing symbols on the display ...“,
page 46. If, on the other hand, no sym-
bol is displayed, run the following
checks before calling the Customer
Service Centre.