AEG BSS 4802, Инструкция по эксплуатации

Страница: 35 / 62

English
35
By cable
1. Connect the 3.5 mm stereo RCA cable to an external
audio source. If required, use a suitable adapter (not
included).
2. Insert the other end of the cable into the AUX-IN jack (2)
on the unit.
3. Repeatedly press the FUNCTION button (8) until “AUX”
is shown on the display.
4. Start the playback of your audio source. Listen to the
sound playback via the speaker. You can adjust the
volume using the VOL+/VOL- buttons (5).
5. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a com -
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (
I ndustrial, S cientific and M edical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (
A dvanced
A udio D istribution P rofile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
In order to be able to perform remote control of the source,
the player must support the AVRCP profile (
A udio V ideo
R emote C ontrol P rofile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Press the FUNCTION button (8) repeatedly, until
“bLUE” is shown on the display. Two short beeps pro-
vide the signal that the device is in the pairing mode.
3. Chose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device “AEG
BSS 4802” will show in your player as a selection.
NOTE:
Only one playback unit can be connected to the
speaker. If the speaker is already connected to
another playback unit, the speaker will not appear
in the BT selection menu.
4. Now enter the password “0000” in your player,
depending on the device manufacturers, model, and
software version.
If the registration has been carried out successfully, a short
beep is emitted.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices
• In the case of problems when registering a player, deac -
tivate the WiFi / mobile data function of your player.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav -
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. The sound
however is not played back via the speaker. After you
have ended the call, the devices are connected to each
other again and playback continues.
USB port (3)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is
not
a malfunction of the device.
1. Press the FUNCTION button (8) repeatedly until “USb” is
shown on the display.
2. Connect a USB storage device directly into the port. After
a few seconds, the total number of titles appears briefly.
The current title is shown in the display for a short period.
The elapsed playing time is then shown afterwards.
For operation, please refer to the section “Description of the
controls”.