The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality
of the water.
Water hardness
Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water classi-
fication
Class
dH
I
0 - 7
0 - 1.3
0 - 50
Soft
II
7 - 14
1.3 - 2.5
50 - 100
Moderately
hard
III
14 - 21
2.5 - 3.8
100 - 150
Hard
IV
over 21
over 3.8
over 150
Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1.
Take the four colour change strip
supplied with the steam set in the
oven.
2.
Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water!
3.
Shake the strip to remove the excess
of the water.
4.
After 1 minute check the hardness of
the water according to the table
below.
The colours of the reaction zones
continue to change after 1 minute.
Do not consider this in the
measurement.
5.
Set the hardness of the water in the
menu: Basic Settings.
Test strip
Hardness of the
water
1
Test strip
Hardness of the
water
2
3
4
The black squares in the table
correspond to red squares on the test
strip.
You can change the hardness level of the
water in the menu: Basic Settings / Water
hardness.
After a power cut you do not have to set
the hardness level of the water again.
7.
DAILY USE
WARNING!
Refer to Safety chapters.
7.1
Navigating the menus
1.
Activate the appliance.
2.
Press
or
to select the menu
option.
3.
Press
to move to the submenu or
accept the setting.
ENGLISH
11
Содержание BS836480A
Страница 1: ...USER MANUAL PROCOMBI PLUS BS836480A EN ...
Страница 70: ...www aeg com 70 ...
Страница 71: ...ENGLISH 71 ...
Страница 72: ...www aeg com au 867302372 C 122015 ...