manualshive.com logo in svg

AEG BP300302, Руководство пользователя

Поделиться
Скачать
AEG BP300302 Скачать руководство пользователя страница 121

 119

Alpha V8

VI. Other details of this warranty are contained in paragraphs IV,

V and VI of the (United States and Canada) Product Warranty,
and paragraphs III, IV, V and VI of the (International) Product
Warranty, contained in this manual, which paragraphs are in-
corporated herein by reference.

Mercury Marine products are built using the most advanced corro-
sion protection process available. This manufacturing system, com-
plemented by dealer and customer participation in an anti-corrosion
preventive maintenance program, provides protection against repair
costs incurred by the effects of marine corrosion.

Owner’s Responsibility

Protection against certain types of corrosion damage must be pro-
vided by using such systems as the Quicksilver MerCathode System
and/or Galvanic Isolator. These certain types of corrosion damage
are: damage due to stray electrical currents (on-shore power con-
nections, nearby boats, submerged metal), or improper application
of copper base anti-fouling paint.
If anti-fouling protection is required, Tri-Butyl-Tin-Adipate (TBTA)
base antifouling paints are recommended on MerCruiser boating
applications. In areas where Tri-Butyl-Tin-Adipate base paints are
prohibited by law, copper base paints can be used on the boat hull
and transom. Do not apply paint to the MerCruiser drive unit or tran-
som assembly. In addition, care must be taken to avoid an electrical
interconnection between the MerCruiser Product and the paint. Cor-
rosion damage that results from the improper application of copper
base paint will not be covered by this limited warranty.

Transfer of Warranty

This Limited Warranty is transferable to subsequent purchasers for
the remainder of the unused portion of the 3-year limited warranty.

Содержание BP300302









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды