
A
A
1.
Open the door fully.
2.
Fully press the clamping levers (A)
on the two door hinges.
3.
Close the oven door to the first
opening position (approximately 70°
angle).
4.
Hold the door with one hand on
each side and pull it away from the
appliance at an up angle.
5.
Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
2
B
1
6.
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
7.
Pull the door trim to the front to re-
move it.
8.
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
9.
Clean the glass panel with water
and soap. Dry the glass panel care-
fully.
Installing the door and the
glass panels
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence. Install the smaller panel first,
then the larger.
13.
WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The appliance does not
heat up.
The appliance is deacti-
vated.
Activate the appliance.
The appliance does not
heat up.
The clock is not set.
Set the clock. Refer to
“Setting and changing
the time”.
The appliance does not
heat up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
ENGLISH
37
Содержание BE7314401M
Страница 1: ...BE7314401M BE7314421M BE731442PM EN User manual ...
Страница 39: ...ENGLISH 39 ...
Страница 40: ...www aeg com shop 892960742 A 042013 ...