AEG BE6915001M, Руководство пользователя

Страница: 14 / 80

14 www.aeg.com
6.11 Using the Core
temperature sensor
1 Place the meat to be roasted with the
Core temperature sensor in it in the
oven.
2 Remove the cover from the
connection point at the top right of
the oven and insert the plug of the
probe into the connection point.
3 As soon as the Core temperature
sensor is connected to the oven you
see the temperature measured by the
probe on the left in the display and the
temperature selected standard for the
probe (80º C) on the right. The display
alternately shows the current time of
day and the temperature set and the
temperature measured by the probe.
PLEASE NOTE
When the power is interrupted, the
programming of the timer is deleted and
the figures 00:00 appear in the display.
Set the current time of day and
programme the timer again.
6.10 Setting the Core
temperature sensor
The Core temperature sensor measures
the temperature in the meat to be roasted.
The oven switches off automatically
when the probe detects a preselected
temperature.
Roasting with the Core temperature
sensor provides an optimum roasting
result regardless of the type of meat or
fish to be roasted.
• Only use the original Core temperature
sensor that comes with the oven.
• Insert the probe in the meat before
starting roasting.
• Insert the probe in one side of the
meat to be roasted, so that the point
ends up in the middle of the meat.
• Insert the probe in the meat all the way
to the handle.
• We recommend turning the meat
halfway the process. Take this into
account when inserting the probe.
• The point of the probe should not
touch any bones or fat zones. Neither
should it end up in a hollow zone, as
may be the case for poultry.
If you wish to change the programming,
you should cancel the function by
simultaneously pressing the
and
buttons. Then set the baking time and
an end time again.
IMPORTANT
If the Core temperature sensor measures
very low temperatures (for very cold
products), the display shows 30ºC. If the
Core temperature sensor measures very
high temperatures, the display shows
99ºC.
An acoustic signal goes off if the probe
is not connected properly.
4
Simultaneously press the buttons
and
.
3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 14