Do not clean the non-stick accessories
using aggressive agents, sharp-edged
objects or in a dishwasher
12.2
Removing the shelf
supports
To clean the oven, remove the shelf
supports.
CAUTION!
Be careful when you remove
the shelf supports.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the removed accessories in the
opposite sequence.
12.3
Catalytic cleaning
The cavity is coated with a catalytic
enamel. It absorbs fat.
Before you turn on the Catalytic
cleaning:
• remove all the accessories and
removable shelf supports.
• clean the oven floor with warm water
and mild detergent.
• clean the inner door glass with warm
water and soft cloth.
1.
Set the Catalytic cleaning. Refer to
"Daily Use" chapter, Oven functions.
The display shows "Cata" and the
duration of the cleaning procedure (1
hour).
You cannot change the duration of the
Catalytic cleaning. You can delay the
start of the cleaning with the function:
END.
The signal sounds at the end of cleaning.
The oven turns off.
2.
Press any sensor field to stop the
signal.
3.
When the oven cools down, clean
the cavity with a wet soft cloth.
Spots or discolouration of the catalytic
coating have no effect on Catalytic
cleaning.
12.4
Oven ceiling
WARNING!
Deactivate the appliance
before you remove the
heating element. Make sure
that the appliance is cold.
There is a risk of burns.
Remove the shelf supports.
You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
1.
Hold the heating element with two
hands at the front.
2.
Pull it forwards against the spring
pressure and out of two holders.
The heating element folds down.
3.
Clean the oven ceiling.
4.
Install the heating element in the
opposite sequence.
www.aeg.com
34
Содержание BCK642020M
Страница 1: ...USER MANUAL EN User Manual Oven BCK642020M ...
Страница 40: ...www aeg com shop 867336444 D 492018 ...