AEG B 99697-5, Руководство по эксплуатации

Страница: 43 / 56

43
5
6
7
Mod. B 99698-5
Mod. B 99697-5
Clean the oven door glass with warm water and
a soft cloth only. Never use harsh abrasives as
they could damage the special heat-resistant
surface of the inner glasses.
Once the cleaning is carried out, refit the oven
door, following the procedure in reverse.
The three glasses in the middle are special
glasses that have been treated to resist heat.
One is marked with a small dot located on a
corner, the other with a black frame and the
third one has no marking.
It is important that, when refitting the glasses,
the inner glasses are fixed in the right position.
To check if this operation has been carried out
correctly, when inserting the glass, make sure
that:
the glass marked with the black frame must be
arranged with the decorated surface which
looks towards the inner side of the door. The
slight roughness of the printing must not be
discernible when you stroke your fingers over
the visible surface;
the dot is located on the upper right corner of
the glass (
see fig. 6 for mod. B 99698-5 and
fig. 7 for mod. B 99697-5 ).
It is not possible to reverse the oven
door.