AEG AVC-1530-G, Инструкция по эксплуатации

Страница: 12 / 16

10
The pre-filter should be replaced with every fifth change of
collection bag and whenever there is damage or a visible
collection of debris on the outside of the filter.
Change the pre-filter
Replace the HEPA filter when loss of vacuum continues to
occur after you have checked for any obstructions in the hose
or wand. Also, install a new collection bag and pre-filter.
Change the HEPA filter
WARNING! TO REDUCE THE RISK OF ELECTRIC
SHOCK-UNPLUG BEFORE TROUBLESHOOTING.
TROUBLESHOOTING
Symptom
Vacuum will
not operate.
Dust comes
out from
motor cover.
Reduced
efficiency and
motor/speed
vibration.
1) No power supply.
2) Faulty power cord.
3) Tank full.
1) The cartridge filter is
missing or damaged.
2) HEPA cartridge filter
is not installed
correctly.
1) There is a blockage
in the nozzle, hose,
or the tank inlet.
The cartridge filter is
clogged by fine dust.
2) Dust bag is full. 2) Replace the dust bag.
1) Check power supply
– cord, breakers,
fuses.
2) Unplug and check the
power cord. If damaged,
have it repaired by a
professional.
3) Empty tank.
1) Attach or replace
cartridge filter.
2) Check the HEPA
catridge filter and install
it correctly.
1) Check nozzle, hose
and tank inlets
for blockage.
Take off the filter and
clean it. Or install a
new cartridge filter.
Possible Causes Corrective Action