35
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
35
5.4.5 System Information
Press “ ” and “ ” in the main interface to select “System Information”, and then press “ENT” to view the parameters
shown in figure 22.
System Information
Part No
.
Serial No .
Soft Ver
Cert . Area
Run Param
Figure 22: System information
The system information include product model, serial number, software version and certificate version.
S y s t e m V e r
V e r s i o n 1 : V 1 . 0 5
V e r s i o n 2 : V 1 . 0 5
M C U V e r s i o n
: V 1 . 0 5
Figure 23: System version
5.4.6 Faults
Press “ ” and “ ” in the main interface to review the fault history, and then press “ENT” to view the sub-menu shown
in figure 24.
F a u l t
1 : A 0 0 5 G r i d u n d e r f r e q
2 : A 0 0 1 I n p u t u n d e r V o l t
3 :
1
Figure 24: Fault information
There are maximal 8 fault information logs in the record shown in figure 24; if no faults are present, the system will
display the message “No Fault”. Refer to section 5.4.2 for detailed information.
5.4.7 Inverter control
Press “ ” and “ ” in the control interface, and then press “ENT” to view the sub-menu shown in figure 25.
C o n t r o l M e n u
O n / O f f
C l e a r
R e s t a r t
F a c t o r y
Figure 25: Control interface
Refer to the below table for detailed information.
