background image

2

AEG HIGH VOLTAGE BATTERY  (10 KWH / 15 KWH) INSTALLATION MANUAL

PD202209 V2-1-22

EN

AEG HIGH VOLTAGE BATTERY  

INSTALLATION MANUAL

Thank you for choosing the reliability of AEG high 
voltage batteries.

This installation manual is intended for dealers and 
installers involved in the planning, installation and 
commissioning of photovoltaic systems deploying 
AEG high voltage batteries. These instructions 
provide you with valuable information to ensure that 
your battery runs smoothly over its whole lifecycle.

AEG high voltage batteries are tested and approved 
by acknowledged independent certification 
authorities and can only be installed by qualified 
professional companies. 

Please observe the standards and regulations 
applying to photovoltaic systems in the relevant 
countries, as well as the rules of the employers’ 
liability insurance associations for accident protection. 
Failure to comply with these can result in major 
injuries and damage.

The information provided in this manual is accurate 
at the time of publication; however, Solar Solutions 
reserves the right to make changes to product design 
and technical specification updates at any time 
without prior notice. Illustrations in this manual are 
meant to help explain system configuration concepts 
and installation instructions. The illustrated items may 
differ from the actual items at the installation location.

Keep this guide in a safe place for further reference 
as it contains important information for product care, 
maintenance and disposal.

CONTENTS

1. PRELIMINARY REMARKS 

3

1.1 Icons  

3

1.2 Product Identification 

3

2. SAFETY 

2.1 General safety  

2.2 Handling safety  

4

2.3 Installation safety 

5

2.4 Grid-tied operation safety 

5

2.5 Maintenance safety 

5

2.6 Response to emergency situations 

6

3. PRODUCT OVERVIEW 

6

3.1 General remarks  

6

3.2 Product appearance 

7

3.3 Technical data  

8

3.4 Operating data 

8

4. INSTALLATION 

8

4.1 Installation tools and materials 

8

4.2 Wire specifications 

9

4.3 Unboxing 

9

4.4 Choosing the installation site 

10

4.5 Mechanical and electrical installation 

10

5. PRODUCT END OF LIFE 

12

6. DISCLAIMER OF LIABILITY 

13 

7. CONTACT 

13

Содержание AS-BBH1-10000/HV Series















Отзывы: