AEG ALT58BC, Оригинальное руководство пользователя

Страница: 45 / 48

42
42
ground level.
cutting plane should be approximately parallel to the ground surface.
not use the product for any purpose not listed in the Specified
Of Use.
KNOW YOUR PRODUCT
See pages 5-6.
■
Harness
■
Attachment hanger
■
Bike handle
■
Upper shaft
■
Knob
■
Lower shaft
■
Brushcutter guard
■
Blade head
■
Throttle trigger
■
Line trimmer head
■
Line trimmer guard
■
Throttle lock
TRANSPORTATION AND STORAGE
before storing or transporting.
ventilated
agents, such as garden chemicals and de-icing salts. Do not store outdoors.
If a cutting blade is fitted, cover it with the blade protector.
For storage, always remove the battery pack.
to prevent injury to persons or damage to the product.
MAINTENANCE
list of guarantee/service addresses).
WARNING! Servicing requires extreme care and knowledge
should be performed only be a qualified service technician. For
bring the product to an authorised service centre for repair.
servicing, use only original replacement parts.
tight.
or cleaning work.
other repairs, contact an authorised service centre.
in the specification table of this manual.
operating position before starting.
centre.
proper tightness to ensure that the product is in safe working condition. Any
part that is damaged should be properly repaired or replaced by an authorised
service centre.
Bring the product to an authorised service centre to replace damaged or
unreadable labels.
Replacement parts
Part Accessory number Part number
Trimmer head AAC101 4932459666
Grass deflector 4931461345
Blade AAC100 4932459665
Blade guard 4931461344
Spare cutting line AAC102 4932459674
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs must be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture.
Store the battery packs in a 30% - 50% charged condition.
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries must be done in accordance with local,
national, and international provisions and regulations.
■
The user can transport the batteries by road without further requirements.
■
Commercial transport of lithium-ion batteries by third parties is subject to
Dangerous Goods regulations. Transport preparation and transport are
exclusively to be carried out by appropriately trained persons and the
process must be accompanied by corresponding experts.
When transporting batteries:
■
Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
■
Ensure that battery pack is secured against movement within packaging.
■
Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
SYMBOLS
Safety alert
Read and understand all instructions before
operating the product. Follow all warnings and safety
instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when using the product.
Wear non-slip, heavy-duty gloves.
Do not expose the product to rain or damp condition.
Beware of thrown or flying objects. Keep all
bystanders, especially children and pets, at least 15 m
away from the operating area.
Keep hands away from cut- off blade.
Class II tool, double insulation
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.
The product is not intended for use with a toothed saw
type blade.
Beware of blade thrust.
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.
The blade appropriate for the product and suited for
cutting pulpy weeds and vines.
7,500
Rotational direction and maximum speed of the shaft
for the cutting attachment.
101
Line trimmer
Guaranteed sound power level
105
Brushcutter
Guaranteed sound power level