AEG AGB728E5NX, Руководство пользователя

Страница: 14 / 144

EN - 14 -
Warnings about temperature adjustments
• It is not recommended that you operate your freezer in environments colder than 10°C
in terms of its efficiency.
• Do not start another adjustment while you are already making an adjustment.
• Temperature adjustments should be made according to the frequency of door openings,
the quantity of food kept inside the freezer and the ambient temperature in the location
of your freezer.
• In order to allow your freezer to reach the operating temperature after being connected
to mains, do not open the door frequently or place large quantities of food in the freezer.
Please note that, depending on the ambient temperature, it may take 24 hours for your
freezer to reach the operating temperature.
• A 5 minute delay function is applied to prevent damage to the compressor of your freezer
when connecting or disconnecting to mains, or when an energy breakdown occurs. Your
freezer will begin to operate normally after 5 minutes.
• Your appliance is designed to operate in the
ambient temperature (T/SN = 10°C - 43°C)
intervals stated in the standards, according to
the climate class displayed on the information
label. We do not recommend operating your
appliance out of the stated temperature limits in
terms of cooling effectiveness.
Important installation instructions
This appliance is designed to work in difficult climate conditions (up to 43 degrees C or 110
degrees F) and is powered with ‘Freezer Shield’ technology which ensures that the frozen
food in the freezer will not defrost even if the ambient temperature falls as low as -15 °C.
So you may then install your appliance in an unheated room without having to worry about
frozen food in the freezer being spoilt. When the ambient temperature returns to normal, you
may continue using the appliance as usual.
Climate Class Ambient Temperature (°C)
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)
T/SN Between 10 and 43 (°C)
Accessories
The Icematic
• Pull the lever towards you and remove the
ice maker tray
• Fill with water to the marked level
• Hold the left end of the lever and set the ice-
tray on the icebox
• When ice cubes have formed, twist the lever
to drop the ice cubes into the icebox.
Do not fill the icebox with water in order
to make ice. It will break.
(In some models)