AEG ACS58B18, Инструкция по эксплуатации

Страница: 25 / 36

25
25
TECHNICAL DATA CORDLESS CHAINSAW ACS58B18
Rated voltage 58 V
Max bar length 450 mm
Chain oil tank capacity 177 ml
Weight (without battery pack, with guide bar, chain and empty tank) 5.08 kg
Usable cutting length 385 mm
Max no-load speed 21 m/s
Vibration level (in accordance with EN 60745-1 & EN 60745-2-13)
Front handle
2.9 m/s
2
Rear handle 3.7 m/s
2
Uncertainty of measurement 1.5 m/s 2
Noise emission level (in accordance with EN 60745-1 & EN 60745-2-13)
A-Weighted sound pressure level at operator’s position
90.8 dB (A)
Uncertainty of measurement 2.5 dB
A-Weighted sound power level 101.8 dB (A)
Uncertainty of measurement 2.5 dB
BATTERY AND CHARGER
Model
ACS58B18
Battery pack Not included
Charger Not included
Compatible battery packs ABP58LI-401
Compatible charger ABC58S, ABC58FX
REPLACEMENT PARTS
Bar Part number 315256001
Chain
Part number PWFTCA1802 (POWERFIT)
Length 18 in. ( 45.7 cm)
Pitch 0.375 in. (0.953 cm)
Gauge 0.05 in. (0.127 cm)
Drive links 62
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
INTENDED USE
The product is intended for use outdoor use only. For safety reasons,
the product must be adequately controlled by using a two-handed
operation at all times.
The product is designed for cutting branches, trunks, logs, and beams
of a diameter determined by the cutting length of the guide bar. It is
designed to cut wood only.
The product is to be used only in domestic applications by adults who