AEG A61900HLW0, Руководство пользователя

Страница: 26 / 80

Problem Possible cause Solution
Audible or visual alarm is on. The cabinet has been re-
cently switched on or the
temperature in the appli-
ance is too high.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm" and if the prob-
lem still occurs contact a
qualified electrician or con-
tact the nearest Authorized
Service Centre.
Power indicator light is flash-
ing. An error has occurred in
measuring the temperature. Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The appliance is not working
properly. Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The lid doesn't close com-
pletely. The lid gaskets are dirty or
sticky. Clean the lid gaskets.
There is excessive frost. Eliminate excess frost.
Food packages are blocking
the lid. Arrange the packages in the
right way, see the sticker in
the appliance.
The lid is difficult to open. The lid gaskets are dirty or
sticky. Clean the lid gaskets.
The valve is blocked. Check the valve.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Refer to "Replacing the
lamp".
The compressor operates
continually. Temperature is set incorrect-
ly. Refer to "Operation" chap-
ter.
Large quantities of food to
be frozen were put in at the
same time. Wait some hours and then
check the temperature
again.
The room temperature is too
high. Refer to climate class chart
on the rating plate.
Food placed in the appli-
ance was too warm. Allow food to cool to room
temperature before storing.
The lid has been opened too
frequently. Do not leave the lid open
longer than necessary.
The lid is not closed proper-
ly. Check if the lid closes well
and the gaskets are undam-
aged and clean.
www.aeg.com 26