background image

21

21

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

Product does nothing or operates sluggishly

Inadequate air pressure supply 

Inadequate lubrication

Worn or damaged O-ring seals or bumper 

Exposure to low temperatures 

Exposure to high temperatures.

Verify adequate air supply. Add air to the 

product through the air fill valve.

Lubricate tool.

Contact Authorised Service Centre for repair.

Allow product to warm to proper operating 

temperature.

Allow product to cool to proper operating 

temperature.

Product jams frequently

Incorrect fasteners

Damaged fasteners

Loose magazine

Dirty magazine

Worn or damaged driver

Verify that fasteners are of the correct size.

Replace fasteners.

Tighten screws.

Clean magazine.

Contact Authorised Service Centre for repair.

LED LIGHT FUNCTIONS

TOOL STATUS

LED LIGHT SCENARIO

ACTION REQUIRED

Normal

Solid green light (No flashes)

No action needed

Low battery

Solid red light (No flashes)

Recharge or replace battery. If problem persists, contact an Authorised Service 

Centre for repair.

Jam mode

Flashing red light

Clear jam – Follow instructions in this operator’s manual.

MAINTENANCE SCHEDULE

FREQUENCY

BOXES OF NAILS NUMBER OF NAILS

MAINTENANCE TASKS

Daily

N/A

N/A

Clean body and blow out tool vents; clean magazine rack; check bolts/screws 

for anything that is loose.

Monthly

5 - 7

15000 - 21000

Lubricate nosepiece with air tool oil. (Oil type: Synthetic lightweight oil)

WARNING!

 Do not lubricate other parts of the product. Otherwise the product 

may be degraded or damaged.

2 - 4 months

10 - 20

30000 - 60000

Check pressure of tank and re-pressurise.

6 - 12 months

21 - 26

65000 - 80000

Return to Authorised Service Centre for Service.

Fastener length

Wear eye protection

Keep hands away

Do not dispose of electric tools together with 

household waste material. Electric tools and 

electronic equipment that have reached the end of 

their life must be collected separately and returned 

to an environmentally compatible recycling facility.

Содержание A18F10FN

























Отзывы: