Step 6
Pull the door trim to the front to re‐
move it.
1
2
B
Step 7
Hold the door glass panel by its top
edge and carefully pull it out. Make
sure the glass slides out of the
supports completely.
Step 8
Clean the glass panels with water
and soap. Dry the glass panels
carefully. Do not clean the glass
panels in the dishwasher.
Step 9
After cleaning, install the glass
panel and the oven door.
The screen-printing zone must face the in‐
ner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
When installed correctly the door trim
clicks.
Make sure that you install the internal
glass panel in the seats correctly.
A
12.5 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
Before you replace the lamp:
Step 1
Step 2
Step 3
Turn off the oven. Wait until
the oven is cold.
Disconnect the oven from
the mains.
Put a cloth on the bottom of
the cavity.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
ENGLISH
27
Содержание 949496339
Страница 1: ...USER MANUAL EN User Manual Oven BEB430A10M ...
Страница 32: ...www aeg com shop 867368137 A 252021 ...