AEG 925052857, Руководство пользователя

Страница: 11 / 72

7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem Possible cause Solution
The appliance is noisy. The appliance is not sup-
ported properly. Check if the appliance stands
stable.
Audible or visual alarm is
on. The cabinet has been re-
cently switched on or the
temperature is still too
high. Refer to "Door Open Alarm/
Indicator" or "High Tempera-
ture Alarm/Indicator".
The temperature in the ap-
pliance is too high. Refer to "Door Open Alarm/
Indicator" or "High Tempera-
ture Alarm/Indicator".
A square symbol is shown
instead of numbers on the
temperature display. Temperature sensor prob-
lem. Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
The lamp does not work. The lamp is in stand-by
mode. Close and open the door.
The lamp is defective. Contact the nearest Author-
ised Service Centre.
The compressor operates
continually. Temperature is set incor-
rectly. Refer to "Operation"/"Control
Panel" chapter.
Many food products were
put in at the same time. Wait a few hours and then
check the temperature again.
The room temperature is
too high. Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm. Allow food products to cool to
room temperature before stor-
ing.
The FROSTMATIC function
is switched on. Refer to "FROSTMATIC func-
tion".
The compressor does not
start immediately after
pressing the FROSTMATIC
or after changing the tem-
perature. This is normal, no error has
occurred. The compressor starts after
some time.
ENGLISH 11