![AEG 925 992 225 Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/aeg/925-992-225/925-992-225_user-manual_10521018.webp)
Problem
Possible cause
Solution
There is too much frost and
ice.
The door is not closed cor-
rectly.
Refer to "Closing the door"
section.
The gasket is deformed or
dirty.
Refer to "Closing the door"
section.
Food products are not wrap-
ped properly.
Wrap the food products bet-
ter.
Temperature is set incorrect-
ly.
Refer to "Operation" chap-
ter.
Appliance is fully loaded and
is set to the lowest tempera-
ture.
Set a higher temperature.
Refer to "Operation" chap-
ter.
Temperature set in the appli-
ance is too low and the am-
bient temperature is too
high.
Set a higher temperature.
Refer to "Operation" chap-
ter.
Water flows on the rear plate
of the refrigerator.
During the automatic de-
frosting process, frost melts
on the rear plate.
This is correct. Dry the water
with a soft cloth.
There is too much con-
densed water on the rear
wall of the refrigerator.
Door was opened too fre-
quently.
Open the door only when
necessary.
Door was not closed com-
pletely.
Make sure the door is closed
completely.
Stored food was not wrap-
ped.
Wrap food in suitable pack-
aging before storing it in the
appliance.
Water flows inside the refrig-
erator.
Food products prevent the
water from flowing into the
water collector.
Make sure that food prod-
ucts do not touch the rear
plate.
The water outlet is clogged. Clean the water outlet.
Water flows on the floor.
The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water
outlet to the evaporative
tray.
Temperature cannot be set.
The Super Freeze function is
switched on.
Switch off Super Freeze
function manually, or wait
until the function deactivates
automatically to set the tem-
perature. Refer to "Super
Freeze function" section.
www.aeg.com
18
Содержание 925 992 225
Страница 65: ......
Страница 66: ......
Страница 67: ......
Страница 68: ...www aeg com shop 804183031 A 192020 ...