AEG 911539175, Руководство пользователя

Страница: 32 / 64

Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
8.1 Using the detergent
30
20
A B D
C
20
30
B A D
C
1. Press the release button ( B ) to open
the lid ( C ).
2. Put the detergent, in powder or
tablets, in the compartment ( A ).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D ).
4. Close the lid. Make sure that the
release button locks into position.
8.2 Using the multi-tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser.
1. Adjust the water softener to the
lowest level.
2. Set the rinse aid dispenser to the
lowest position.
8.3
Setting and starting a
programme
Starting a programme
1. Keep the appliance door ajar.
2.
Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3.
Press the programme button
repeatedly until the indicator of the
programme you want to select starts
flashing.
4.
Close the appliance door to start the
programme.
Starting a programme with
delay start
1. Set a programme.
2.
Press Delay to delay the start of the
programme of 3 hours.
• The indicator comes on.
3. Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry
function.
www.aeg.com 32