AEG 825 D, Инструкция по установке и эксплуатации

Страница: 13 / 20

13
Maintenance and care
●
The hood must always be disconnected from the mains
power supply before beginning any maintenance work.
Metal grease filter
●
The purpose of the grease filters is to aspirate grease particles
which form during cooking and it must always be used, either in
extraction or recirculation mode.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.
Open the metal grease filter
●
Push the filters towards the
back of the unit and then pull it
down and out.Fig. 4.
Hand washing
Soak grease filters for about one hour in hot water with a grease-
loosening cleaner, then rinse off thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters when it are dry.
Dishwasher
Place the grease filters in a dishwasher. Select the most intensive
washing programme and highest temperature, at least 65°C.
Repeat the process if necessary. Refit the grease filters when they
are dry.
When washing the metal grease filter in the dishwasher a slight
discoloration of the filter can occur, this does not have any impact
on its performance.
●
Clean the inner housing using a hot detergent solution only (never
use caustic detergents, abrasive powders or brushes).
Fig. 4