AEG 3381007, Оригинальное руководство пользователя

Страница: 11 / 16

11
11
INTENDED USE
The cordless hedge trimmer is only intended for use outdoors. For
safety reasons the product must be adequately controlled by using
two-handed operation.
The product is designed for home or domestic use. It is intended to
cut and trim hedges, shrubs, and similar vegetation.
It should be used in dry, well-illuminated conditions.
It is not intended to cut grass, trees, or branches. It should not be
used for any other purpose than hedge trimming.
GENERAL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions,
including those given in the accompanying brochure.
Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury. Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injury.
Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery, or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer
at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with switch is
dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
TECHNICAL DATA CORDLESS HEDGE TRIMMER AHT58LI201 AHT58B
Rated voltage 58 V DC 58 V DC
No load speed 1 200 m
-1
1 200 m
-1
Blade length 650 mm 650 mm
Cutting capacity 28 mm 28 mm
Weight (without battery) 4.6 kg 4.6 kg
Weight (with battery) 5.8 kg 5.8 kg
BATTERY AND CHARGER
Model AHT58LI201 AHT58B
Battery pack ABP58LI-201 Not included
Charger ABC58S Not included
Compatible battery packs ABP58LI-201, ABP58LI-401
Compatible chargers ABC58S