AEG 30" B3007H-L-B, Руководство пользователя

Страница: 11 / 34

11
3.5 Fully automatic – (Start Later – Stop Later)
Turn the oven as indicated in the paragraph 2.3.
Select a cooking function, the oven suggests a default temperature, the temperature can
be changed by using the buttons “ ” or “ ”,.
The function is a combination of the two function of duration and end, to be set
separately, without the constraints of precedence ( first the duration and then the end or
viceversa).
After 4 sec from the last push of a button, the oven will be in mode of delayed start: it will
later operate automatically for the specified cooking duration and will stop at the set end
cooking time.
After the elapsed time, the oven enters in “Cooking end” mode.
During the delayed start both the temperature and oven function are shown, and both are
adjustable.
The temperature bar remains off to remember that cooking is not currently running.
All loads are turned off until the cooking will take action.
3.6 End cooking mode
At the end of cooking time, the oven turns off all loads, it activates a triple beep
intermittently;
The temperature and programs display are switched off. The timer display shows the time
of the day and the two symbols Pot and Auto flash.
To unlock the oven, just press any button below the timer display: the acoustic signal
ends, the oven is ready to receive new commands, you can select a new cooking
function, or turn it off permanently with the button
.
3.7 Cancelling a set program
To cancel a set programme (“ A ” symbol activated on the programmer display):
– Select “ dur ” on the programmer display by touching the key “ ” and then touch
“ ” key.
– A set programme is also cancelled when the oven is switched OFF in the “stand-by”
mode. At the next power up the oven is not programmed.
IMPORTANT: If the oven is ON, remember to switch it off manually otherwise it does not
stop operating in the set mode.