background image

• Make sure that the appliance is installed below and adjacent safe structures.
• Keep the minimum distances to the other appliances and units.
• The appliance cannot be positioned on a base.
• Built in ovens and built in cooking surfaces are attached with special connection sys

-

tem. To prevent damage to the appliance, only use an appliance with the appliances

from the same manufacturer.

Electrical connection

• The appliance must be earthed.
• Make sure that the electrical data on the rating plate agree with your domestic power

supply.

• Information on the voltage is on the rating plate.
• Always use a correctly installed shockproof socket.
• Do not use multi-way plugs, connectors and extension cables. There is the risk of fire.
• Do not replace or change the mains cable. Contact the service centre.
• Make sure not to squash or cause damage to the mains plug (if applicable) and cable

behind the appliance.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug –

if applicable.

Use

• The appliance is only for domestic use. Do not use the appliance for commercial and

industrial use.

• Only use the appliance for domestic cooking tasks. This is to prevent physical injury to

persons or prevent damage to property.

• Do not use the appliance as a work surface or storage surface.
• The interior of the appliance and the accessories become hot during use. There is the

risk of burns. Use safety gloves when you insert or remove the accessories or pots.

• Be careful when you remove or install the accessories to prevent damage to the oven

enamel.

• Always stay away from the appliance when you open the door while the appliance is

in operation. Hot steam can release. There is the risk of skin burns.

• To prevent damage or discoloration to the enamel:

– do not put any objects directly on the appliance floor and do not cover it with alu

-

minium foil;

– do not put hot water directly into the appliance;
– do not keep moist dishes and food in the appliance after you finish the cooking.

• Discoloration of the enamel has no effect on the performance of the appliance so it is

not a defect in the sense of the warranty law.

• Do not apply pressure on the open door.
• Always close the appliance door when you cook, even while grilling.

Safety information

5

Содержание 24" BS7304001M































Отзывы: