AEG 10997, Инструкция по эксплуатации

Страница: 34 / 120

www.aeg-automotive.com 34
TroUblesHooTInG
Problem Possible cause Solution
The monitor stays dark� The
blue leD doesn’t light up� The 12 V monitor cable
plug is not plugged into the
vehicle‘s cigarette lighter or a
12 V outlet� Plug the 12 V monitor cable
plug into the cigarette lighter
or a 12 V vehicle outlet�
The fuse inside the 12 V mo-
nitor cable plug is burnt out
and must be replaced� replace the defective fuse
inside the 12 V monitor cable
plug with a new fuse (also see
“replacing fuses”)�
The monitor displays no
image� The camera is not connected
to the monitor� Check the battery charge�
If necessary, recharge the
reversing camera�
The image on the monitor
shows interference� The wireless connection
between monitor and camera
is too weak, thus interfering
with data transmission� Position the transmitter
closer to the monitor or
adjust the position of the
monitor�
The monitor image is not
displayed clearly� The camera lens may be dirty� Carefully clean the camera
lens�
bright light is hitting the
camera lens� The image quality will impro-
ve once you move out of the
area of the interfering light�