AEG Electrolux S86340KG1, Руководство пользователя

Страница: 21 / 80

2. Remove the screw from the lamp cover.
3. Remove the lamp cover.
4. Replace the bulb (E14 socket) with one of
the same power (the maximum power is
shown on the lamp cover).
5. Install the lamp cover.
6. Tighten the screw to the lamp cover.
7. Connect the mains plug to the power
socket.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
Technical data
S86340KG1 S86348KG1
Dimension
Height 2000 mm 2000 mm
Width 595 mm 595 mm
Depth 623 mm 623 mm
Rising Time 10 h 10 h
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.
Installation
WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the ap -
pliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:
Technical data 21