AEG Electrolux S86340KG1, Руководство пользователя, Страница: 19 / 80

Problem Possible cause Solution
The appliance is noisy.
The appliance is not supported
properly.
Check if the appliance stands sta -
ble (all feet and wheels should be
on the floor). Refer to "Levelling".
The cushion spacers located be -
tween the back of the cabinet
and the pipes come loose.
Put them back in place again.
The buzzer sounds. The
Alarm icon flashing.
The temperature in the freezer is
too high.
Refer to "High Temperature
Alarm"
upper or lower square
is shown in the tempera-
ture display.
An error has occurred in meas -
uring the temperature.
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
The compressor runs
continuously.
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open longer
than necessary.
The food temperature is too
high.
Let the food temperature de -
crease to room temperature be -
fore storage.
The room temperature is too
high.
Decrease the room temperature.
Water flows inside the
refrigerator.
The water outlet is clogged. Clean the water outlet.
Food prevent that water flows
into the water collector.
Make sure that food do not touch
the rear plate.
Water flows on the
ground.
The melting water outlet does
not flow in the evaporative tray
above the compressor.
Attach the melting water outlet
to the evaporative tray.
There is too much frost
and ice.
The door is not closed correctly. Refer to "Closing the door".
The door gasket is deformed or
dirty.
Refer to "Closing the door".
The temperature in the
appliance is too cold.
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
Refer to "Hints for temperature
inside the fridge.
The temperature in the
appliance is too warm.
The Temperature regulator may
be set incorrectly.
Set a colder temperature.
The door is not closed correctly. Refer to "Closing the door".
What to do if… 19