AEG Electrolux LAVATHERM 88800, Руководство пользователя

Страница: 27 / 64

3. Close loading securely. Lock must audibly lock.
4. Press the
START PAUSE
(START PAUZE) button to continue the drying cycle.
Pro Steam programme complete / removing laundry
After the Pro Steam cycle is completed , 0:00 starts flashing and alternatively the
messages:
Finished. Please remove the laundry and Anti-crease appear in the dis -
play. If the buzzer has been activated, an audible signal sounds at regular intervals.
The Pro Steam programme is automatically followed by an anti - crease
phase, including brief steam phases, which lasts around 30 minutes.
The drum rotates during the anti-crease phase. This keeps the laundry loose and
free of creases. It can be removed at any time during the anti-crease phase, except
during steam injection phases (look for STEAM INJECTION message in the display !).
Laundry should be removed as quickly as possible.
1. Open the loading door to remove the laundry.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best
to use a damp hand for this purpose. (See “Care and cleaning” chapter.)
3. Remove laundry one garment at a time.
To retain the effects of the Pro Steam treatment, clothes must be removed
one garment at a time during the anti
- crease phase and hung immediately
on a clothes hanger to dry (for at least 5 - 15 mins, depending on fabric and
selected steam level). Do up the buttons and tug the garment into shape,
paying particular attention to cuffs and seams.
4. Turn the programme knob to OFF.
After each drying cycle
– Clean the micro-fine filter and fine filter
– Drain the condensed water container if you do not use water recirculation sys
-
tem (See chapter “Care and Cleaning”.)
5. Close door.
27