AEG Electrolux LAVATHERM 88800, Руководство пользователя

Страница: 18 / 64

Pro Steam system
Fill steam water tank
You must fill up the steam water tank before using a Pro Steam programme for
the first time. Use the distilled water provided if there is not yet any condensed
water from previous drying programmes (see chapter on ‘Care and cleaning, Emp
-
tying condensed water container’). If, after a Pro Steam programme is selected,
following message
The steam water tank is empty. Please fill it and then press
START on the display appears, you will need to fill up the steam water tank with
distilled water. Otherwise, you will not be able to start any Pro Steam programme.
Pull drawer containing condensed water
container out a little
1
, then pull the water
tank’s filler neck
2
Important! Only fill the water tank with
distilled or fully desalinated water. Do not
use tap water or additives! You can also
use the condensed water from the tank,
as long as you filter it first (use the can-
ister supplied with the filter fitted: see
picture opposite).
Fill with distilled water from the canister pro -
vided, up to the MAX mark inside the
container.
Push filler neck and drawer with condensed water container back in.
When dry, all textiles not specifically prohibited in the chapter ‘Sorting and
preparing laundry’ may be treated with the Pro Steam System. Wet textiles
may only be treated if they are labelled as suitable for dry programmes.
Water recirculation system
This system allows you to use for a Pro Steam cycle automatically the condensed
water collected in the condense water tank during a drying cycle.
1
2
max.
18