AEG Electrolux LAVAMAT BELLA 1481, Руководство пользователя

Страница: 21 / 64

Problems Causes
The washing machine
stops during a wash cy -
cle :
• the water or electricity supply is defective,
• a Rinse hold has been selected,
• the drum shutters are open.
The lid doesn’t open at
the end of the cycle :
• the “immediate opening” 1)
light is not lit,
• the temperature inside the drum is too high,
• the lid unlocks 1 - 2 minutes after the end of the cycle
1)
.
The E40 error code ap -
pears in the display
2)
and the START/PAUSE
pushbutton flashes in
yellow
3)
:
• the lid isn’t closed properly.
The E20 error code ap -
pears in the display
2)
and the START/PAUSE
pushbutton flashes in
yellow
3)
:
• the drainage filter is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed too high (see “Installation” section).
• the drainage pump is blocked,
• the standpipe is blocked.
The E10 error code ap -
pears in the display
2)
and the START/PAUSE
pushbutton flashes in
yellow
3)
:
• the water inlet tap is closed,
• the water supply has been cut off.
The EF0 error code ap -
pears in the display
2)
and the START/PAUSE
pushbutton flashes in
yellow
3)
:
• the drainage filter is obstructed,
• the anti-flooding security system has been activated, please proceed
as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before unplugging,
- call the after-sales service.
21
Softener runs directly
into the drum when fill -
ing the dispenser box :
• you have gone past the MAX indicator.
Operating problems
1) Depending on model.
2) On some models, the audible signals can sound.
3) After solving any problems, press the START/PAUSE pushbutton to restart the interrupted programme.