AEG Electrolux LAVAMAT 72650, Руководство пользователя

Страница: 43 / 52

Positioning and levelling
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by carpets,
rugs etc.
Before placing it on small tiles, apply a rubber coating.
Never try to correct any unevenness in the floor by
putting pieces of wood, cardboard or similar
materials under the machine.
If it is impossible to avoid positioning the machine
next to a gas cooker or coal-burning stove, an
insulating panel covered with aluminium foil on the
side facing the cooker or stove, must be inserted
between the two appliances.
The machine must not be installed in rooms where
the temperature can drop below 0.
The water inlet hose and the drain hose must not be kinked.
Please ensure that when the appliance is installed, it is easily accessible for the
engineer in the event of a breakdown.
Carefully level by screwing the adjustable feet in or out. Never place cardboard,
wood or similar materials under the machine to compensate for any unevenness
in the floor.
Automatic foot: The rear foot on the left-hand side of your washing machine
is built as a shock absorbing foot, which is why the appliance gives in the back
left-hand corner if put under load. The automatic foot guarantees that the
appliance does not move even at high spin speeds. Basically the automatic foot
does not need to be set.
Water inlet
An inlet hose is supplied and can be found inside the
machine drum.
Do not use the already employed hoses to
connect to the water supply.
This appliance must be connected to a cold
water supply.
1. Open the porthole and extract the inlet hose.
2. Connect the hose with the angled connection to the machine.
43 Installation
HEC007S
HEC0006
192998640 gb.qxd 13/08/2007 17.39 Pagina 43