AEG Electrolux LAVAMAT 72650, Руководство пользователя

Страница: 18 / 52

Select an additional rinse
T his appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press simultaneously the Spin Speed and Prewash buttons for some seconds:
the Extra Rinse pilot light comes on in the programme progress display. This
function stays permanently on. To remove it press the same buttons again until
the
Extra Rinse light goes off.
When the appliance is performing additional rinses the Extra Rinse pilot light
comes on.
If the pilot light Overdosage lights up at the end of the programme, it
indicates that too much detergent has been used.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
Start/Pause button.
Changing a running programme is possible only by resetting it . Turn the
programme selector dial to
O
and then to the new programme position. The
washing water in the tub will be not emptied out. Start the new programme by
depressing the
Start/Pause button again.
Interrupting a programme
Depress the Start/Pause button to interrupt a programme which is running, the
corresponding light starts to flash. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a programme which is running. Now you
can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the Start/Pause button.
The door can be opened.
If the door remains locked, this means that the machine is already heating, that
the water level is above the bottom edge of the door. In this case the door can
not be opened.
18 Use
192998640 gb.qxd 13/08/2007 17.38 Pagina 18