27
In daily use
Starting a dishwashing cycle
1.
Check that the spray arms can turn freely.
2.
Turn the water tap on fully.
3.
Press the ON/OFF button.
4.
Select the desired cycle.
The programme indicator comes on. The remaining time expected for the cycle
will be shown in the multidisplay.
3
During the dishwashing cycle, the remaining time shown in the multidisplay
may be adjusted according to the size of the load, degree of soiling, etc.
5.
Close the door. The dishwashing cycle will begin.
A light signal in the form of a dot appears at floor level.
3
If the dishwasher is built in at high level with flush fitting cupboard doors, the
light signal cannot be seen.
The dot shaped light signal is not dangerous. (It is not a laser.) It lights up while
a dishwasher cycle is running and goes out when the cycle ends.
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary.
Interrupting the dishwashing programme by opening the dishwasher door
1
Hot steam may escape when the door is opened. There is a risk of scalding.
1.
Open the door carefully. The dishwashing cycle will stop.
2.
Close the door. The cycle will continue.
Aborting the dishwashing cycle
1.
Press function buttons
2
and
3
and keep them pressed.
The LED indicators of all the programme buttons that can be selected light up.
2.
Release the function buttons. The dishwashing cycle has been cancelled.
3.
If you want to start a new cycle, check whether there is any detergent in the dis
penser.
