AEG Electrolux CP 33, Руководство по эксплуатации

Страница: 25 / 29

g
45
• ... the cleaning program cannot be
started?
– Turn the bean container to the pow-
der setting, then start the cleaning
program.
• ... "Descale" key (Fig. 3, j) is
flashing?
– Number of coffees dispensed
necessitates descaling: Carry out
descaling: see „Running the
Descaling Program“ page 43.
• ... the espresso/coffee is not hot
enough?
– Preheat the cups with hot water.
– Increase coffee temperature; see
„Setting the Coffee Temperature“
page 38.
• ... the espresso/coffee is too weak?
– Not enough ground coffee. Increase
the amount of ground coffee, max. 2
measuring spoons.
– The coffee bean container is empty.
Add coffee beans.
– The coffee quantity is set too low.
Increase the coffee quantity, see
„Changing and Saving the Coffee
Quantity“ page 38.
– The grinding texture is set too
coarse. Set the grinding texture to a
finer grade, see „Setting the
Grinding Texture“ page 38.
• ...the crema is too weak?
– Use fresh water.
– Use fresh beans or fresh coffee
powder.
– Clean the coffee-making unit, see
„Cleaning the Coffee-making Unit",
page 41.
• ...milk is not frothy enough?
– The milk is too hot or too old or the
fat content is too high. Use suitable
milk.
– Blocked steam nozzle. Clean the
steam nozzle, see page 37.
– The air intake in the frothing aid is
blocked. Clean the frothing aid, see
page 37.
• ... the bean container will not locate
on the grinder?
– Coffee bean residue on or around
the grinder: Remove coffee bean
residue from the grinder, see
page 41.
– Coffee bean residue is jammed in the
bean container lock. Clear the bean
container lock of coffee bean residue.
• ... the grinder makes very loud noises
when grinding?
– The grinder is blocked by a foreign
body. Remove the foreign body as
described in this manual, refer to
„Cleaning the Grinder" page 41. If
necessary, have the coffee machine
checked by the Customer Service
Centre.
– You can continue to use your coffee
machine with ground coffee.
• ... the coffee-making unit will not
come out?
– The coffee-making unit is not in the
base position.
– Re-assemble the appliance and
switch on.
– Now switch the appliance off
again in the normal way. The
coffee-making unit runs to the
base position.
– Remove the coffee-making unit,
refer to „Cleaning the Coffee-
making Unit", page 41.
• ... the coffee-making unit will not fit
back in?
– The coffee-making unit is not closed.
Turn the service lever to close the
coffee-making unit.
– The latching lever is not up. Push the
metal clip up, and insert the coffee-
making unit, see page 42.