background image

Heat set

-

ting

Cooking process

suitable for

Cook time

Tips/Hints

12-13

Heavy frying

Hash browns, loin

steaks, steaks, Flä

-

dle (pancakes for

garnishing soup)

5-15 mins. per pan Turn halfway

through cooking

14

Boiling Searing

Deep frying

Boiling large quantities of water, cooking pasta, searing meat

(goulash, pot roast), deep frying chips

The power function is suitable for heating large quantities of liquid.

Cleaning and care

WARNING!

Sharp objects and abrasive cleaning agents will damage the appliance. Clean the appliance

and remove the residues with water and washing up liquid after each use. Remove also the

remnants of the cleaning agents!

Scratches or dark stains on the glass ceramic that cannot be removed do not affect the

functioning of the appliance.

Cleaning the appliance after each use

1. Food containing sugar, plastics, tin foil residues should be removed at once using a

scraper. Place a scraper on the glass ceramic surface at an angle and remove residues

by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little

washing up liquid. Finally, 

 rub the appliance dry using a clean cloth

 .

2. Limescale rings, water rings, fat splashes, shiny metallic discolorations should be re

-

moved after the appliance has cooled down using cleaner for glass ceramic or stainless

steel.

What to do if ...

Problem/Display

Possible Cause

Remedy

The cooking zones cannot be

switched on or are not operat

-

ing

More than 10 seconds have

passed since the appliance was

switched on

Switch the appliance on again.

 

The lock is switched on 

Switch off the lock (See the

section “Locking/unlocking the

control panel”)

 

The child safety device is
switched on 

Deactivate child safety device

(see the section "Child safety

device")

 

Several sensor fields were

touched at the same time

Only touch one sensor field

14

Cleaning and care

Содержание 78031KF-MN





















Отзывы: