Function
Condition
Outcome after the time has
elapsed
Automatic cut-out
a heat setting is set
acoustic signal
00
flashes
Cooking zone switches off
Countdown timer
cooking zones not in use
acoustic signal
00
flashes
If just one countdown value is set you can change it only when the appliance is switched
on.
If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking
zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step
Control panel
Display
1.
Touch once
Pilot light of the first cooking zone flashes
2.
Touch once
Pilot light of the second cooking zone flashes
3.
Touch once
Pilot light of the third cooking zone flashes
4.
Touch once
Pilot light of the fourth cooking zone flashes
If other timer functions are set, after a few seconds the shortest remaining time of all the
timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step
Control panel
Display
1.
Select a cooking zone
Pilot light for the cooking zone selected
flashes
2.
Touch or
00
to
99
minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
Control panel
Display
1.
Select a cooking zone
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
10
Operating the appliance
