AEA RPQ2 Скачать руководство пользователя страница 20

Страница: 20 / 20

{

WARRANTY

}

Your RPQ2 comes with a one-year limited warranty on parts and labor,
shipping not included. Please see the supplied warranty card for details.

Registering your preamp with AEA will extend the warranty to a full three
years. Simply fill out the supplied registration form and send it to:

Audio Engineering Associates

1029 N. Allen Ave

Pasadena, CA 91104

You may also register your AEA equipment online at
www.bit.ly/aeawarranty

{

SUPPORT

}

If you should encounter any problems with your preamp or if you have
questions regarding using the RPQ2 in specific application, please
contact our customer support team at

[email protected]

To talk to a live human being, call +1 (626) 798-9128, between 9:00
a.m.- 5:00 p.m. PT Monday through Friday.

There are a number or audio and video recordings of various AEA
microphones and preamps online. Please visit www.ribbonmics.com

Manufactured by AEA Ribbon Mics & Preamps

1029 N. Allen Ave. Pasadena, California 91104, USA
Tel: +626-798-9128 Fax: +626-798-2378 www.ribbonmics.com

Содержание RPQ2





















Результаты поиска

Содержание RPQ2

Отзывы:

Похожие инструкции для RPQ2

Бренды по названию

Популярные бренды

AEA RPQ2, Руководство пользователя

Результаты поиска

Содержание RPQ2

Отзывы:

Похожие инструкции для RPQ2

Бренды по названию

Популярные бренды