97-8004167 07-14-17
Information subject to change
11
7224 & 7226 OPERATOR’S MANUAL –
SECTION 3
3.5 Start-up Procedure
1.
Turn down the level of your signal source.
2.
Turn down the gain control of the amplifier.
3.
Depress the POWER switch to turn the
amplifier ON.
4.
Wait for the yellow READY and green RUN
LEDs to illuminate.
5.
Adjust the level of your input signal source
to achieve the desired output level.
6.
Turn up the Gain control on the amplifier
until the desired voltage or power level is
achieved.
7.
Adjust the input signal level to achieve the
desired output level.
