11
11.2013
Gateway
8.3 Laws, Regulations and Technical Rules
In preparing the current solar technology systems for
the respective country laws and regulations are to be
noted for country, federal, European, and international
levels.
The generally accepted engineering standards
considered to apply, which are usually formulated in
the form of standards, guidelines, rules, regulations
and technical rules of state and federal agencies,
utility companies, and professional associations and
committees for the relevant department.
Through the installation of solar panels / solar system,
the requirements for roofing, waterproofing and exterior
wall cladding according to the rules of the German
Roofing Trade, or equivalent national and international
guidelines and standards are to be considered.
An examination of stability, the thermal protection
and the aging behavior is required for retrospective
installation.
To comply with the regulations on accident prevention,
the use of safety systems (safety belt, scaffolding,
arresting gear, etc.) may be required. These security
systems are not included and must be ordered
separately.
The installation must be performed by professionally
qualified and authorized personnel with an approved
training certificate (by a state or national organization)
for the respective department.
Inside the Gateway, there are NO serviceable or
exchangeable parts. The inverter may neither be
opened by the customer nor the system installer.
FCC Compliance
This equipment has been tested through FCC part 15
Class B. The unit complies with the defined standard.
During the unit is under influence of strong electric
fields the unit may be disturbed. This may cause lost
messages.
Tested for IT power distribution system.
9.0 Technical Data
See page 12 for technical data of the Gateway.