NYC1/NYC1-SCR
USER MANUAL
12
Bluetooth Pairing
Turn on NYC1/NYC1-SCR, attached it to PC via USB cable. When device is connected to PC, will create
virtual COM port. Check on device manager on which port is connected. After that run the special
application for PC (Fig. 3)
. Press “Search” button on the app, and in right side will be show all available
COM ports. Select on which is connected device, then press
“C
onnect to device
”. F
rom Bluetooth
management on mobile device (equipped with BLE 4.2) select connect to NYC1/NYC1-SCR, then on
mobile device screen will be show PASSKEY (Fig. 6). White LEDs will start to light one by one continually,
on special app will be show Passkey (Fig. 4)
, if they are same press “
On/Off
”
two times on NYC1/NYC1-
SCR to confirm (Fig. 5)
, then special app return message “THE DEVICES ARE CONNECTED”
(Fig.7 when
on each device is confirming pairing). If Passkey is being
different press “On/Off” button
one time on
NYC1/NYC1-SCR to cancel pairing.
Figure 3
Figure 4
Figure 5
Figure 6
Содержание NYC1
Страница 1: ...Adyen NYC1 and NYC1 SCR User Manual ...
