TAKING MEASUREMENTS
• Immerse the probe into the solution
to be tested. The sleeve holes must
be completely submerged.
• Tap the probe repeatedly to remove
any air bubbles that may be trapped
inside the sleeve.
• If needed, press RANGE (AD332)
until the EC or TDS range is selected
on the LCD.
• Allow for the reading to stabilize. The primary LCD
displays the measurement in the selected range, while
the secondary LCD shows the temperature reading.
To store current reading into memory,
press STORE key from measurement
mode.
The LCD will display for a
few seconds the "Stor" mes-
sage together with the "Log"
tag and the sample number.
By pressing the STORE key a complete set of informa-
tion is memorized: date, time, EC or TDS and tempera-
ture readings.
Up to 250 samples can be stored into memory.
When the memory is full and
the STORE key is pressed, the
sample will not be stored and
the LCD will display the
"FULL" message.
In this case, it is necessary to delete the last sample or
all logged data to proceed.
12
29
LOG-ON-DEMAND