_
USING THE CONTROL CONSOLE
1.
Ensure you have a terminal program installed. An example of an open source terminal program is
TeraTerm. Other terminal programs may be used to configure the advoli
TM
TB4 Standard graphics card
console.
2.
The advoli
TM
TB4 Standard graphics card uses a Universal Serial COM port that also works under most
other operating systems. The port is virtual, so any port setting and speed is supported.
3.
Open the Serial and Control Console with the terminal program and type ‘help’ or ‘h’ to display the help-
menu as shown in the below picture:
4.
WARNING:
Be aware, many of the commands in the advoli
TM
graphics card console are for advanced
users, and should generally not be used by end users as it may render your product non-functioning.
This document describes the most used and useful commands for the advoli
TM
graphics cards that are
safe to use for general users. Any other command not explicitly listed in this document under the heading
‘safe commands’, but may be shown in the images in this document or are available through the console
at time of use, should not be used. If you choose to use the additional advanced commands, you do so at
your own risk and you assume all responsibility for any consequence arising from such action.
NOTE:
all commands in the advoli
TM
graphics card console are non-case-sensitive, so you can use and
mix upper and lower case characters.
TB4S-V3-6/6/19
Page
of
15
26
TM
