advidia A-200, Руководство по установке, Страница: 32 / 46

A-200 Installation Manual
26
Figure 3-19 Pendant Adapter
3.4.2 Pendant Mounting
Before you start:
Pendant mounting is applicable to indoor/outdoor solid ceiling construction. The following are the
mandatory requirements for pendant mounting:

The ceiling must be thick enough to mount the expansion screws.

The ceiling must be strong enough to withstand more than 8 times the weight of the dome
and its accessories.
Steps:
1. Install the mounting base.
Steps:
(1) Drill four φ8 holes in the ceiling according to the screw holes of the mounting base, and
then insert M8 expansion screws (not supplied) into the holes.
(2) Pull the power cable, video cable and control wire through the cable hole of the mounting
base.
(3) Attach the mounting base to the ceiling by aligning the screw holes of the mounting base
with the expansion screws on the ceiling.
(4) Secure the mounting base by using nuts and washers to tighten the four expansion screws.
Figure 3-20 Install the Mounting Base
Note : Make sure that the cables are long enough. For outdoor applications, please apply
waterproof sealant between the ceiling surface and mounting base and around the cable hole. The
pendant mounting application is not recommended for places where the speed dome is susceptible
to rain.
2.
Install the pendant pole.
Steps: