advidia A-200, Руководство по установке, Страница: 13 / 46

A-200 Installation Manual
7
Figure 1-10 DIP Switch Settings
Notes:

The default dome address is 0; the default baud rate is 2400; and the default value of the 120Ω
terminator is OFF.

For HD-SDI speed dome, it adopts self-adaptive PELCO-D, PELCO-P and private protocol which
cannot set by the DIP switches.

For fiber speed dome, it adopts the protocol according to different vendors, with fixed fiber
baud rate as 115200bps.
1.3.2 Address Settings
The DIP switch SW1 is used for setting the address of speed dome. You can refer to Table 1-2 and
Table 1-3 for details of setting the speed dome address to a specific number.
Table 1-2 Set the Dome Address
Dome
Address
SW1 Settings 1 2 3 4 5 6 7 8
0
ON
1 2 3 4 5 6 7 8
SW1
OFF OFF OFF OFF OFF OFF OFF OFF
1
ON
1 2 3 4 5 6 7 8
SW1
ON OFF OFF OFF OFF OFF OFF OFF
- - - - - - - - - -
255
ON
1 2 3 4 5 6 7 8
SW1
ON ON ON ON ON ON ON ON